Beach Filters, compressed air filter, breathers and humidity moisture control

Compressed Air Filters

Filters

Find A Filter & Element Type

Filter Installation & Maintenance

The presence of oil/oil vapors and water at the point-of-use is ordinarily evidenced by the liquid in the bowl or trap having a milky appearance which is an emulsion of oil and water. These contaminants are damaging to such sensitive equipment as instruments, pneumatic controls and hundreds of other industrial plant processes.

The following are typical point-of-use applications for Beach Filters:

Instrument Air
Pneumatic Controls
Robotics
Process Air
Cleaning Parts & Drying
Air Operated Assembly
Injections Molding
Filtering Gases
Conveying Materials
Air Jet Cleaning
Sorting Equipment
Separating Pills

Spray Painting & Finishes
Bottle & Container Cleaning
Pneumatic Extruders
Air for Packing & Weighing
Mixing and Blending
Aeration & Agitating of Liquids
Testing
Operating Clamps & Chucks
Cooling of Electronic Equipment
Sandblasting
Squeeze Rolls
Oxygen Analyzers

Beach has been manufacturing filters for these and thousands of other uses for over 60 years. Point-of-use filters by Beach range from <5 to 1200scfm at 150 to 250 psi in a variety of plastics, metals and desiccants to meet the most exacting needs.

Specialty Filters 5 - 15scfm Ideal for instrument air and pneumatic controls Constructed of 100% polyurethane Disposable or replaceable elements Low flow applications

T-Line Filters Triple action filtration Constructed of 100% polyurethane Rapid servicing Cleanable coalescing scrubber 20 - 60 scfm

In-Line Filters Single action filtration Constructed of aluminum, acrylic or aluminum w/heat-treated glass Replaceable elements Sight glass for visible inspection of desiccant filters 20 to 1200 scfm

MoistureBloc™ For over ten years, these filters have been proven performers in the welding industry with robotic and hand-held plasma cutting machines. Because MoistureBloc™ filter blocks water and does not absorb it, consumable parts life is extended two to four times and arc stability is increased two times over use of unfiltered air. And because MoistureBloc™ filters will flow at 25 scfm at a maximum pressure of 125 psig, it fits most compressors.


	Privacy l Site Map l ©Copyright 2006 Beach Filter Products, Inc. All rights reserved P (717) 235-1136 or (800) 232-2485 inside the USA l F (717) 235-4858 Beach Filter Products, Inc. l 7682 Glenville Rd. l Glen Rock, PA 17327 Container Dri® II is a trademark of Sud Chemie and used with permission. MoistureBloc™, AquaGuard® and Cylform® are registered trademarks of Beach Filters.